Description
If we think intimately about the structure of the product so obtained and we dissect it, we will discover that for every “linear” millimeter of C-Systems CFS with the addition of microfiller powder, we come to create about 18-25 non-communicating air chambers (from 400 to 600 per square millimeter and from 5,000 to 15,000 per cubic millimeter !!!) that is to say the closed cell that does not absorb water because the thicknesses are fractionated, and independent of each other. We will have an ultra light (light) filler, which can be applied in high thicknesses, suitable for large imperfections to be filled with a single shaved and above all easily sanded, suitable also for the immersed parts. The result can be compared to a cuttlefish bone, light, resistant, non-deformable, self-supporting, unalterable. This protection made on the heads of the screws and nails of wooden boats, ensures a perfect impermeability of the metal and therefore the lack of corrosion that occurs over time, ensuring a perfect seal of the entire structure (see descriptive wood cycle). Microfiller powder is very suitable for making large diameter connections and threads, on all non-aligned surfaces, because it keeps the wood unaltered, guaranteeing protection against humidity and vapors; unlike normal stuccos, despite its lightness, it has a strong hold and mechanical resistance. It is suitable for joining parts glued to “T”. ensuring a perfect seal of the entire structure (see descriptive wood cycle). Microfiller powder is very suitable for making large diameter connections and threads, on all non-aligned surfaces, because it keeps the wood unaltered, guaranteeing protection against humidity and vapors; unlike normal stuccos, despite its lightness, it has a strong hold and mechanical resistance. It is suitable for joining parts glued to “T”. ensuring a perfect seal of the entire structure (see descriptive wood cycle). Microfiller powder is very suitable for making large diameter connections and threads, on all non-aligned surfaces, because it keeps the wood unaltered, guaranteeing protection against humidity and vapors; unlike normal stuccos, despite its lightness, it has a strong hold and mechanical resistance. It is suitable for joining parts glued to “T”.
