Description
Bare steel. Apply 1 coat of EPOFOND AM-9 on sandblasted steel according to SA 2,5 and let dry for 12-24 hours. (If sandblasting is not possible proceed with mechanical cleaning to bring the surface to bare steel, apply 1 coat of EVIOX CROMOMINIO and let dry for 8-12 hours.) Apply then 2 coats of SOLVER PRIMER allowing 24 hours between coats. Overcoat then with 2 coats of COSTIERA TF antifouling allowing min.8 hours between coats.
Bare wood. Apply one coat of EVIOX CROMOMINIO and allow to dry for 8-12 hours. Apply 2 coats of SOLVER PRIMER allowing 24 hours between coats followed by 2 coats of COSTIERA TF antifouling allowing min. 8 hours between coats.
Painted hull. If the old antifouling is still in sound conditions, compatible, and well sticked on the substrate, it is enough to apply 1-2 coats of SOLVER PRIMER followed by 2 coats of COSTIERA TF antifouling, allowing the required waiting time between coats.
Fiberglass. Degrease with suitable cleaner and rinse with water the surface to be coated. Sand with fine abrasive paper and remove dust. Apply 1 coat of POLIFIBER PRIMER and after 24 hours sand with fine abrasive paper. Apply then 2 coats of COSTIERA TF WHITE antifouling allowing min.8 hours between coats.
N.B. as an alternative to POLIFIBER it is possible to use EPOFOND AM9 in the same conditions.
