Description
PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
New hulls in iron. Apply 2-3 coats of EPOFOND AM / 9 on sandblasted iron at grade 2-2.5 at intervals of no more than 24 hours from each other (at least 6-8 hours), then 2 coats of MAKO antifouling at a distance of at least 12 hours apart
New wooden hulls. Apply a coat of CROMOMINIO-AT widely diluted. Follow with two coats of SOLVER PRIMER, leaving 24 hours between coats. Then apply 2/3 coats of MAKO antifouling at least 12 hours apart
New hulls in fiberglass or plastic. Degrease with detergents and water and rinse. Lightly sand with fine abrasive papers and dust. Apply a coat of EPOFOND AM-9 and after 24 hours sand with fine sandpaper. Then apply with 2/3 coats of MAKO antifouling at least 12 hours apart.
Hulls already painted. – If the old antifouling is in good condition, compatible, and well anchored, it will be sufficient to apply one or two coats of SOLVER PRIMER before overcoating with 2/3 coats of MAKO antifouling at least 12 hours apart
-If the old antifouling is not in good condition, bring the support back to new by removing the residues of the old paint with a scraper or brush and then proceed as recommended for new hulls.
| Application: by spreading | Ready to use |
| Application: Spray | Ready to use |
| Application | Dilution |
| Dust dry | 60-90 minutes (20c) |
| Recoat time | 6-8 hours (20 ° C) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 50-60 microns per mano |
| Application temperatures | Between + 10 ° C and + 40 ° C |
